Other listings by this author |
|
 wodImapServer 2.4.1 (Downloads: 318)
wodImapServer ActiveX control is IMAP4 protocol server component WeOnlyDo! COM ImapServer ActiveX control is component that can be easily integrated into your applications to provide full IMAP4rev1 protocol server implementation. All you need to do is to put it on VB form, call it's Start method and it's immediately accepting connections by your clients! It fully supports commands defined in RFC2060.
Since wodImapServer is COM object and not the full application, there's few things developer should look after - simpl...
|
|
 wodSSH 2.9.6 (Downloads: 325)
wodSSH is windowless (SSH client and Telnet client) ActiveX component Client component that provides support for communication with remote console-type services.
Most commonly, it will be used for Telnet based servers (running on UNIX OS), but wodSSH does even more: it allows you to communicate encrypted (and secured, of course) with SSH1 and SSH2 (secure-shell) servers, as well as any other non-encrypted server (such as SMTP or POP3).
For ones that don't know - the SSH transport layer is a secure low level transport pro...
|
|
 wodSSH.NET 2.5.3 (Downloads: 380)
wodSSH.NET is a client SSH and Telnet component for .NET framework Client component for MS.NET framework that provides support for communication with remote console-type services. It allows you to communicate encrypted (and secured, of course) with SSH1 and SSH2 (secure-shell) servers, as well to Telnet servers (using Telnet protocol that is NOT encrypted). For ones that don't know - the SSH transport layer is a secure low level transport protocol. It provides strong encryption, cryptographic host authentication, and integrity prot...
|
|
 wodPop3 1.4.2 (Downloads: 266)
wodPop3 is used to access mailbox on the server using POP3 protocol ActiveX component that is used to access mailbox on the server using POP3 protocol. Mail found on the server can be retrieved locally(complete messages or only headers) and/or can be deleted from server. Full set of commands for standard operations is supported.
Using wodPop3 you can easily get information about content of your mailbox.For each message found on server, wodPop3 will create new Message object in Messages collection, allowing you to easily...
|
|
 wodTelnetDLX 2.5.2 (Downloads: 266)
wodTelnetDLX a telnet client component ready to connect to terminal based client wodTelnetDLX is a telnet client component ready to connect to various terminal based clients, most commonly to UNIX telnet daemon. Besides supported Telnet protocol, it also supports secured communication (through encryption) using well known SSH (SSH1 and SSH2 are supported), as well as SSL/TLS (Secure Socket Layer protocol).
ActiveX version of the component has its own Terminal GUI (Graphic user interface) that supports VT100 and Linux emulation - so...
|
|
 wodSSHTunnel 1.7.2 (Downloads: 288)
wodSSHTunnel component is secure tunneling (based on SSH protocol) component wodSSHTunnel component is server-type component that will add secure tunneling (based on SSH protocol) capabilities to your application. Based on your rules and definitions, it will accept local connections, encrypt it and forward to SSH server (where they will be decrypted and sent to destination host). SSH server is required for this component to work - encryption will take place between local computer (running wodSSHTunnel) and SSH server of your choice.
It...
|
|
 wodDHCPServer 1.0.7.0 (Downloads: 214)
wodDHCPServer provides passing configuration information to hosts on TCP/IP General information
wodDHCPServer is a DHCP server component (Dynamic Host Configuration Protocol), available as COM object and ActiveX control. It provides a framework for passing configuration information to hosts on TCP/IP network. wodDHCPServer implements protocol specific infrastructure, allowing you to allocate IP addresses from your address pool, and provide it to requesting clients by your rules. It is configurable by set of objects and events where yo...
|
|
wodBeep 1.0.0.0 (Downloads: 225)
ActiveX component is a peer-to-peer connection ActiveX component is a peer-to-peer connection convenient to label each peer to behave in context of Listener(Server) or Initiator(Client). Component comes with several profiles included such as: SINK/ECHO profiles for testing, ROT13 profile that will grap message data, ZIP Tuning profile that will compress cocntents of messages on the fly, SYSLOG Raw and Cooked profiles for transmitting (and recieving) syslog messages....
BEEP protocol is a generic app...
|
|
 wodSmtp 1.5.3 (Downloads: 326)
wodSmtp activex client component used to deliver e-mail messages to server ActiveX client component used to deliver email messages directly to the server of the recepient, using SMTP protocol. It automatically finds appropriate server where message should be delivered, or uses SmartHost through Hostname property.
It includes several one-line methods for sending entire email (including attachments). It can also load prepared messages (created with Outlook, Outlook Express or any other client..), reformat it, change it's properties an...
|
|
wodFtpDLX.NET 1.6.5 (Downloads: 404)
wodFtpDLX.NET is secure FTP, SFTP, FTPS client .NET 2.0 component Secure FTP client .NET 2.0 component that supports encrypted and non-encrypted FTP access to the servers for transferring files or complete directories. It supports old, very common, FTP protocol, but also secured FTPS (FTP+SSL) and SFTP (FTP+SSH). No matter what protocol is selected - it is completely transparent for programming. Same methods and same events apply for all protocols.
Features include
- FTP, FTP+SSL with and without encrypted data ...
|
|
 wodFTPServer 3.1.2 (Downloads: 309)
ActiveX Component that implements server side of FTP, FTPS and SFTP protocol ActiveX Component that implements server side of following protocols: FTP, FTP/S (FTPS or FTP+SSL) both in explicit and implicit modes, and SFTP (secure ftp subsystem on SSH2 secured channel).
Support for all 3 protocol is transparent for your programming - you have same set of events, same set of properties and methods, same control over connected users - and just one property to change to switch from one protocol to another - Protocol property!
...
|
|
 wodPop3Server 1.6.0 (Downloads: 318)
wodPop3Server Active X control provide full Pop3 protocol server implementation WeOnlyDo! COM Pop3Server ActiveX control is a component that can be easily integrated into your applications to provide full Pop3 protocol server implementation. All you need to do is to put it on VB form, call it's Start method and it's immediately accepting connections by your clients! It fully supports commands defined in RFC1939.
Use your favorite mail client (such as Outlook Express or Eudora) to read mail provided by your own application. How? Th...
|
|
 wodSFTP.NET 3.4.1 (Downloads: 360)
wodSFTP.NET is a .NET implemenation of client side of SFTP protocol The Secure File Transfer Protocol provides secure file transfer functionality over any reliable data stream, SSH in this case. It is the standard file transfer protocol for use with the SSH2 protocol.
wodSFTP.NET is a dotnet implemenation of client side of this protocol which is reliable and easy to use.
SFTP protocol is designed to provide primarily file transfer, but also more general file system access on the remote server - in secure m...
|
|
 wodWebServer.NET 1.3.4 (Downloads: 345)
Is an .NET Component that implements server side of HTTP and HTTPS protocols General information:
wodWebServer.NET is an .NET Component that implements server side of HTTP and HTTPS protocols (HTTPServer). It's main purpose is to serve HTML pages, GIF/JPG/PNG images, documents, and other resources that are accessible through Browser clients (such as Internet Explorer, Mozilla Firefox, Netscape etc..) It is robust, easy to use, fast, and can be used in all .NET environments. It serves both static pages, as well as dynamically created on...
|
|
wodMailbox 2.2.2 (Downloads: 287)
wodMailbox provide full management over mailboxes and message parsing WeOnlyDo! Mailbox is a component that can be easily integrated into your applications to provide full management over mailboxes and message parsing.
Using wodMailbox, you can easily access mailbox, count messages, look at messages, count parts, save attachments, look at headers, delete messages etc.. When wodMailBox opens mailbox, it expects to find there either regular mailbox just as is used on UNIX systems (one file with full mail messages one after anothe...
|
|
 wodSSHServer 2.2.6 (Downloads: 351)
SSH and Telnet Server ActiveX component,support SSH2/SFTP server capabilities wodSSHServer is an SSH Server ActiveX component (but also Telnet Server ActiveX as well) that will give you ability to easily add SSH2 (and SFTP) server capabilities to your application, as well as old TELNET server protocol. SSH protocol provides strong encryption of data, and authentication of users over insecure networks, such as Internet. Using it is really easy. Add it to your form (or create instance on the fly), use internal methods to generate pair of keys f...
|
|
 wodSmtpServer 2.5.1 (Downloads: 346)
wodSmtpServer ActiveX component is SMTP server component WeOnlyDo! SmtpServer ActiveX control is a component that can be easily integrated into your applications to provide full non-relaying Smtp (Simple Mail Transfer Protocol) server implementation.
All you need to do is to put it on VB form, call it's Start method and it's immediately accepting connections by your clients! It fully supports commands defined in RFC2821.
Use your favorite mail client (such as Outlook Express or Eudora) to send mail to ...
|
JaSFtp 11.10: JaSFtp - Automated SFTP client (secure FTP), Run 1000+ tasks on a schedule.
AbleFTP 11.10: AbleFtp - FTP client designed to automate and run 1000+ FTP tasks a day.